Thursday, January 23, 2014
Back At It Bench Build Underway
Shown above is the basic carcass made from some pretty decent birch ply I bought at HD of all places for a reasonable price, was surprised at the quality of the plywood, havent found a void yet. It is sitting on an old bench that moved with me from TN that was sitting in my garage. I drilled some holes in the top for the holdfasts, and use the Benchcrafted Moxon vise I built to use as an end vise. It is working out great, but cant wait to get the real deal.
Case with face frame and end frame dry fit. Both frames are constructed with 5/4 (net 1") poplar. If you look at Benchcrafteds website, you will see the base of the bench is painted , so poplar is a good choice for the outer frame.
Frames and back attached, all that is needed for the bottom is the "foot" It is a frame made of 1X3 poplar. I may change that thickness once I determine the overall height of the bench.
As of this posting, the door for the end panel is mounted, the doors for the front are made, the drawers are next.
This will be one solid bench. The advertised finished weight will be around 350 lbs, certainly sturdy enough to handle any hand tool work.
A finished photo can be seen at Benchcrafted website and for those of you attending WIA in the Fall in Covington, KY, Jameel my have his bench there at the show.
More to come as I hit significant milestones during the construction.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment