Rommy plan

a new railing project

jim and i pretty much finished up a new railing project at stratton mountain today. sam and jim had installed all but one of the 10 new steel sections that sam fabricated last week and today, we cut, fit and installed the wooden handrails and metal post caps ... glad thats done ... of the twenty cuts, 7 were angled definitely, and few of the others were square because the posts were installed when the house was built oh, 20 years or so ago, there were almost no two angles or handrail ends the same ... and that involved almost uncountable trips up and down the stairs to the chop saw on the porch .... my legs were humming by the time we were finished ... click the photos to enlarge them ...
view from below ... a definite design change from the original railing below ... our job was to update the existing sort of a swiss chalet look
a little more contemporary and timeless now ...
like always, we started with sams cad drawing,
from which we made templates on the cnc
and constructed the 10 sections
we did some test fitting and minor adjustments
before we painted them at the metal shop
and made a metal post cap for the clients approval ...
next we made and finished the recycled chestnut handrails
and cut them to fit today ... tedious, fussy fitting and lots of cuts, but they all fit great in the end.
the masons from brickwerks were working today, putting a new stone face on the fireplace, and when they are finished, we will build and install the two cabinets in the photshopped mockup below. the cabinets are a shortened version of one of a pair we made about 7 years ago. wanna see a bigggg house ... check that link ... the cabinet in that photo is 5 wide and 10 high ... these will be about 54 x 85 .. the post about the tv bracket was to work out the details for the cabinet on the right ... we are also coming down the home stretch on a recycled chestnut table for the dining area of that same house ... more on that later ... all for now ...